Process and Applications |
Equipment |
| Fluid Cleaning (F) |
Clarifuge
225 & 236 |
Removes suspended solids from liquid
w Grinding coolants
w Cutting oils
w Quench oils
w Vibratory finishing waste water
w Lens grinding coolant
w Deep hole drilling coolants
w Wire drawing lubricants |
| Oil Extraction / Chip Wringing (E) |
Chip Wringer
301 & 601
or
Fluid Extractor
401, 402, 1101
& 1100 |
Separates industrial fluids from solids
w Cutting oil from metal chips and turnings
w Water soluble coolant from chips or turnings
w Oil or coolant from parts
w Oil or coolant from stampings |
| Chip Washing (CW) |
Degrease and clean parts + Oil Extractor
pan and cover
Chips are washed with hot detergent to
remove oil and dried prior to the remelt operation. |
| Washing / Drying (WD) |
Degrease and clean parts
w Screw machine parts
w Cold headed parts
w Fasteners and fittings |
| Sludge Extraction(SES): |
Removes liquid from most sludge.
w Honing Sludges
w Glass Grinding
w Most types of metal grinding
w Quench oil slag |
| Galvanizer (GA): |
Galvanizer |
Spins molten metals (zinc or tin) from
industrial parts and leaves uniform
rust-resistant coating. |
| Custom Centrifuge (CC): |
Custom
Systems |
Custom systems for your specific
application can be provided upon
request. |
|
|
Remove Suspended Solids From Liquid with The Kine-Spin Clarifuge |
The Clarifuge is essentially a centrifugal
"filter" which removes solid contaminants
down to 5 micron size from a wide variety
of fluids. Unlike other types of filtration, the
clarifuge uses no physical filtration
mediums such as bags or cartridges, so
there are no costly filters to dispose of or
repurchase.
|
Literature:
Clarifuge Fluid Cleaning |
| Machine Capacities |
Previous
Unit
Number |
New Unit
Number |
Product
Name |
Load
Weight
Capacity |
Load
Liquid
Capacity |
Max.
RPM |
Max. Gs |
Wringer Basket
Size |
| 225 |
|
Clarifuge |
40 lbs |
1 gal. |
3,450 |
2,029 |
12" dia. x 5" dp. |
| 236 |
|
Clarifuge |
50 lbs |
2 gal. |
3,150 |
1,821 |
13" dia. x 6"dp. |
| Clarifuge - The Industry Standard |
- Centrifugal Particle separation with no
bags or filters
- Fluid flow through rate up to 15 gallons
per minute
- Minimum separable solid particle size 2 to
5 microns
- Separated solids capacity – 1 gallon or 2
gallons
- Removes abrasive & machining swarf & fine chips
- Clarifies wire EDM, quench, & wire
drawing fluids
- Cleans fluid from process equipment sump
sludge
- Easy bowl cleaning by Clari-Clean
cleaning unit
- Compact, 30 inch long, 20 inch wide, 20
inch high
- Rugged ball bearing spindle, simple reliable
belt drive
|
| How a centrifuge Cleans Fluid |
A
centrifuge is a mechanical device used to separate
substances of different
densities. It quickly separates
substances that would normally slowly separate
under
the influence of gravity.
Refer
to the diagram to the
right. Dirty
fluid is fed into a rotating bowl. As
the
fluid makes its way up and out of the bowl, centrifugal
force throws the
solid contaminates (that are denser
than the fluid) to the outer perimeter of
the bowel
where, over time, they compact and build a sludge
wall (A).
The
liquid overflows the bowl and gravity
drains from the centrifuge (B). Accumulated solids
are easily cleaned from
the bowl by simply removing
the bowl and scooping out the sludge.
|
 |
| Machine Accessories Include: |
  |
|
 |
| Clarifuge Bowls |
Bowl Cleaner Option |
Portable Option |
|
